System Settings - User Settings - ABB SmartTouch B/stainless Product Manual

12.7.6

System settings - User settings

The panel language and the function of sensors and door communication can be set within the
user settings. The user settings can also be reset.
Language
The language of the panel and the separators to be used can be specified via the "Language"
tab. Here a selection can be made from the specified options within the drop-down menu.
Language
■
Options:
The parameter is used to specify the language of the panel.
Separator
■
Options:
The parameter is used to specify the type of the decimal (comma or full stop) and thousands
separator (comma or full stop).
Sensors
The "Sensors" tab can be used to specify how strong the haptic feedback of the panel is to be
when it is touched.
Activate haptic feedback
■
Options:
This parameter is use to activate or activate the haptic feedback. Then the vibration can be
adjusted with the slider (left = weak, right = strong).
Temperature
■
Options:
The parameter is used to specify the temperature unit. Also the type of wall can be specified,
since this has an effect on the temperature reading. The temperature is indicated in the status
display on the dashboard by activating the "Show temperature in the status display" checkbox.
Product manual 2CKA001473B5343
<Language>
<Decimal separator>
<Thousands separator>
Activate
Deactivate
<Temperature>
<Wall type>
Operation
│351