Setpoint Settings - Reduction For Heating Economy By; Setpoint Settings - Setpoint For Heating Building Protection; Setpoint Settings - Setpoint For Cooling Comfort; Setpoint Settings - Setpoint For Cooling Standby - ABB SmartTouch B/stainless Product Manual

Options:
Specifies the comfort temperature for heating economy.
Notice
This parameter is only available when the "Control function" parameter is set
on "Heating", "Heating with additional stage", "Heating and cooling" or
"Heating and cooling with additional stage" and parameter "Setpoint for
standby and Eco are absolute values" is set on "activated".
10.24.79 Setpoint settings — Reduction for heating economy by
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the ECO icon.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages" and parameter "Setpoint for standby and Eco are
absolute values" is set on "deactivated".
10.24.80 Setpoint settings — Setpoint for heating building protection
Options:
Function for protecting the building against the cold. On devices with a display, this mode is
indicated by the frost protection icon. Manual operation is blocked.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating," "Heating with additional stage," "Heating and cooling" or "Heating and
cooling with additional stages".
10.24.81 Setpoint settings — Setpoint for cooling comfort
Options:
Specifies the comfort temperature for cooling when people are present.
Notice
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage" and parameter "Setpoint heating
comfort = setpoint cooling comfort" is set on "deactivated".
10.24.82 Setpoint settings — Setpoint for cooling standby
Options:
Specifies the comfort temperature for cooling during standby.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Setting option between 5 - 45
Setting option between 0 - 15
Setting option between 5 - 15
Setting option between 10 - 40
Setting option between 10 - 40
Application "Internal RTC"
│258