ABB SmartTouch B/stainless Product Manual page 313

Blind (basic version can be further adjusted, e.g. with value display)
Blind control elements can be used to implement the activation of blinds, awnings, doors and
other motor-driven actuators.
Control
Blind
Product manual 2CKA001473B5343
Status Function
Stopping/starting in the middle (depending
on the operating mode). The button in the
middle can display the status. A
corresponding animation is displayed during
the movement.
Operating procedure:
– Icons for Up/Down
Brief press of the button
Moving by a step (the icon in the middle
does not change).
Long press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When the end stop has been reached or a
brief press on icon "Up / Down" (depending
on the direction of movement).
Change
Change in the direction of travel with a brief
press on icon "Up/Down". Followed by a
long press on icon "Up / Down" (depending
on the desired direction of movement).
– Icons in the middle (blind)
Brief press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When reaching the limit stop or a brief press
of the button on the icon it stops in
intermediate position.
Operation
│313