Type Of Control - ABB SmartTouch B/stainless Product Manual

The parameter is used to set whether a standard icon or a self-selected icon ("user-defined") is
displayed.
The following parameters can only be set when parameter "Icon type" is set on "User-defined".
Icon for opened:
Options:
The parameter is used to select the icon that is to be displayed when the blind is open.
Icon for closed:
Options:
The parameter is used to select the icon that is to be displayed when the blind is closed.
Icon for intermediate position:
Options:
The parameter is used to select the icon that is to be displayed when the blind is in an
intermediate position.
10.6.2

Type of control

Options:
The parameter is used to specify whether commands to move the blinds in connection with the
slat adjustment are sent to linked blind actuators via the actuation of the buttons.
The following supplementary parameters are available for the selection "With slat adjustment":
Position for icon "Slat up":
Options:
The parameter is used to specify whether the icon for "Slat up" is positioned on the right or left
side of the control element.
Icon for up/open:
Options:
The parameter is used to select the icon that is to be displayed in the control element for
"Up/Open".
Icon for down/close:
Options:
The parameter is used to select the icon that is to be displayed in the control element for
"Down/Close".
Repeat telegram "Slat adjustment" all:
Options:
This parameter is used to set the time interval between two "Slat adjustment" telegrams.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Custom
<Selection of an icon from the list>
<Selection of an icon from the list>
<Selection of an icon from the list>
With slat adjustment
Without slat adjustment
Left
Right
<Selection of an icon from the list>
<Selection of an icon from the list>
<Selection of an icon from the list>
"Blind" control element
│140