Type Of Display Element - Wind Rose; Type Of Display Element - Wind Rose - Display Value In Control Element - ABB SmartTouch B/stainless Product Manual

10.13.13 Type of display element — Wind rose
Note
For option "Wind rose" of parameter "Type of display element" the same
supplementary parameters are available, such as for option "Linear
measurement display", Chapter 10.13.9 "Type of display element — Linear
measurement display — Measurement display with colour display" on page 177.
Parameter "Measurement display with colour display" is not available.
10.13.14 Type of display element — Wind rose — Display value in control element
Options:
The parameter is used to specify whether the value of the selected element is displayed in the
display element.
– Deactivated: No display. No additional parameters available.
– Activated: The following supplementary parameters are displayed:
Unit:
Options:
The parameter is used to enter the unit or the unit sign with which the measured value is
displayed in the display element.
The length of the text is limited to 60 characters.
Notice
Display the "Value of wind force" parameter when activating the parameter
– Only the following units are available for the selection of the parameter "Display value of
wind force":
Unit - Parameter "Display value of wind force":
Options:
Decimal places:
Options:
The parameter is used to specify the number of decimal places of the displayed measured
value.
The number is limited to 2 places.
Thousands separator:
Options:
The parameter is used to specify whether a thousands separator is displayed in the
measured value.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Deactivated
Activated
<Text>
m/s
Bft
km/h
Setting option from 0 - 2
Deactivated
Activated
"Display" control element
│180