ABB SmartTouch B/stainless Product Manual page 317

Room temperature controller (basic version)
Air conditioners can be controlled with the control element for room temperature controllers.
Control
RTC control element
(extension unit)
RGBW operation (basic version)
Specific settings can be made for corresponding lamps (LEDs, Philips Hue, etc.) with the
RGBW control elements. For example, the colours can be changed or the warm-white
component can be adjusted.
Control
RGBW operation
Product manual 2CKA001473B5343
Status
Status
Function
The current operating mode and the mode of
the controller (e.g. heating) are displayed in
the control element.
Additional operating modes can be called up
with swiping movements. Control is carried
out via the buttons.
Function
The lamp is switched on or off with a press of
the control element.
It can also be used to make a preset. The
value display indicates the brightness
component. In line with the lamp types and
presets in the commissioning software,
additional functions can be called up (in the
example via the arrow), e.g. colour or white
control.
Preset adjustment:
The lamp must first be set as desired. Then
the lamp is switched on.
Then follows a long press of the control
element. This saves the lamp setting as
preset. Now the preset is called up with each
activation (long press).
This process must be repeated for each
adjustment. The lamp is switched on and off
normally with a brief press.
Operation
│317