ABB SmartTouch B/stainless Product Manual page 134

RGB: Used for RGB lamp.
The following supplementary parameter is available:
Switching On/Off via:
■
Options:
The parameter is used to specify the On/Off control.
– Switch object: Setting, when the lamp contains a "Switch" object. The following
supplementary parameters are available:
Switched On -> preset value:
■
Options:
– Deactivated: No presets are sent when the lamp is switched on.
– Activated: The stored presets are sent when the lamp is switched on.
Switched Off -> RGB value 0,0,0:
■
Options:
– Deactivated: No RGB values are sent when the lamp is switched off.
– Activated: The RGB values (0,0,0) are sent when the lamp is switched off. This parameter is
important for lamps that do not contain a "Switch" object.
– RGB feedback: Setting when the lamp contains no "Switch" object but is switched off via
the RGB values.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Switch object
RGB feedback signal
Deactivated
Activated
Deactivated
Activated
Operation of "RGBW" control element"
│134