Mounting - ABB SmartTouch B/stainless Product Manual

6.5.2

Mounting

The device is suited for flush-mounted and surface-mounted installation.
The surface-mounted mounting frame ST/A10.1-811; not part of the scope of supply) can be
used for surface mounting when the device is not mounted on the associated flush-mounted
installation box.
The following mounting versions are possible:
in flush-mounted installation box
■
– Mounting in solid wall, See "Mounting in flush-mounted installation box in solid wall" on
page 37
– Mounting in hollow wall, See "Mounting in flush-mounted installation box in hollow wall"
on page 38
in Surface-mounted mounting frame directly on the wall
■
– Mounting with surface-mounted mounting frame, See "Mounting with surface-mounted
mounting frame" on page 39 (un Table stand 83506-500)
– Mounting with table standSee "Mounting with table stand" on page 39
The associated Flush-mounted installation box (6136/07 UP-500; not included in the scope of
supply) can be used in hollow walls. Can also be used in solid walls. For this, part of the box
must first be inserted flush-mounted.
Notice
Detailed information is available in the enclosed installation instructions for the
surface-mounted mounting frame and the associated flush-mounted installation
box.
Product manual 2CKA001473B5343
Connection, installation / mounting
│36