ABB SmartTouch B/stainless Product Manual page 82

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
Displays
Type of the control elements
■
Options:
The parameter is used to specify the type of representation of the control elements. Control
elements that are represented in a reduced layout only show the most important data.
Colour theme
■
Options:
The parameter is used to specify the colour theme of the display. With option "Depending on
daylight" the theme is bright throughout the day. At reduced brightness in the evening the colour
theme switches over to dark automatically.
Brightness for switching to dark mode
■
Options:
The parameter is used to specify the brightness value from which the switchover to darkness
mode takes place (1 = dark - 5= bright).
Activating the automatic return to the dashboard page
■
Options:
When the checkbox is activated, there is an automatic return to the dashboard page.
Return to the start screen after ... [sec.]
■
Options:
The parameter is used to specify after how many seconds there is an automatic return to the
start screen.
Notice
The parameter is only available if the parameter "Enable automatic return to
dashboard page" is activated.
The brightness is adjusted to the ambient light
■
Options:
When the checkbox is activated, there is an automatic adjustment of the display to the ambient
light.
Product manual 2CKA001473B5343
Normal
Reduced
Dark
Light
Dependent on daylight
1 - 5
Activated
Deactivated
10 - 3600
Activated
Deactivated
ETS5)
│82