Display - Panasonic EBL512 G3 Operating Instructions Manual

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
5.3.3.

DISPLAY

See reference picture
5.3. DETAILED DESCRIPTION OF THE FRONT
29
The door is open in any c.i.e. (not valid for 5055) in the system. See also section 17. OPEN DOOR on page 35.
30
Loss of mains in any c.i.e. or external power supply unit in the system. The unit is currently power supplied via batteries.
Service signal. The week average sensor value is over the service level, or detector is outdated, for one or more analog smoke detectors in the system.
See also menu 30.5. SENSORS ACTIVATING SERVICE SIGNAL (H4/U5) on page 100.
(Symbol flashing): The system is in service mode:
• A COM loop is disconnected
31
• A COM loop is in service mode
• A Zone line input is disconnected
• Check loop, Autogenerate loop or Auto-addressing function etc. is in progress
32
The c.i.e. is set into "Sensitive fault detection mode" via menu 31.2. SENSITIVE FAULT DETECTION MODE (H5/A2) on page 105.
33
One or more "Technical warnings" are generated in the system. See also menu 30.6. TECHNICAL WARNING (H4/U6) on page 100
34
The functions of the soft keys will vary depending on the situation, convention and language.
35
"Silenced Alarm devices" is indicated by this symbol.
The soft key "25" has the function Evacuate in the following conventions: Belgian, British Standard, Dutch,
Hungarian, Spanish and Ukrainian. In all other conventions it has the function Alert Annunciation Acknowl-
edge.
on page 14.
17