Panasonic EBL512 G3 Operating Instructions Manual page 40

ENTERING THE MENUS DURING FIRE ALARM
By pressing the soft key "Menu" during fire alarm, you will get access to the menu system
See chapter on page 22.
7. ACCESS
Access code is required. In this case a part of the display's alarm window will be temporarily suppressed
to permit the display of the menu system.
Fire alarm: 002-03
Latest alarm: 003-11
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calender and clock
H4 Present system status
H5 Service
H6 FAULT Acknowledge
H7 Perform ZONE TEST
H8 Maintenance
H9 Interlocking outputs and inputs
H10 Change password
Escape
menu
The normal alarm window will be automatically displayed again after the menu system is escaped or 5 minutes after the latest
manoeuvre in the menu system.
The alarm window will also be automatically displayed again if any of the soft keys "Esc menu" or "ESC" is pressed or push button
"Alarms queued".
Alarm number 1 (of 1)
40