Alert Annunciation Alarm (Aa Alarm) - Panasonic EBL512 G3 Operating Instructions Manual

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS

18.1.4. ALERT ANNUNCIATION ALARM (AA ALARM)

When the AA function is enabled, indicated by the LED Routing equipment "Fire brigade tx delay", the indications, print-outs, actions
and so on are the same as for a normal fire alarm (see above) except for the c.i.e. output for routing equipment (fire brigade tx),
which will not be activated directly.
There will also be a "title". "Alert annunciation" or "Alert annunciation acknowledged" will be added to the normal fire alarm informa-
tion. The AA alarm has to be acknowledged within an acknowledge time and reset within an investigation time, otherwise the out-
put(s) for routing equipment (fire brigade tx) will be activated. See EBL512 G3 Planning Instructions for more information regarding
the AA function. Acknowledgement and reset of the AA alarm can be done on an AA unit 5054.
See also section
19.5. ALERT ANNUNCIATION
Fire alarm: 010-01
Alert annunciation
010-01
Zone
User definable alarm text for 010-01
Menu
The "Ackn. alert annunciation" text is only visible if an AA alarm is activated and not if this key is used for
the "Evacuate" function.
on page 52.
Alarm number 1 (of 1)
Address
SMOKE
1 zone in alarm
Ackn. Alert
annunciation
43