Push Buttons - Panasonic EBL512 G3 Operating Instructions Manual

5.3.2.

PUSH BUTTONS

See reference picture
5.3. DETAILED DESCRIPTION OF THE FRONT
15
DEL
16
ESC
17
Key pad
18
Enter
19
Left / right keys
20
Up / down keys
21
Alarms queued
22 - 25
Soft keys
26
Reset
27
Silence alarm devices
28
Silence buzzer
on page 14.
Used to clear / delete all visible entry fields.
Used to stop input of data or to step upwards in the menu system.
Numeric key pad for the digits 0-9.
Used to accept / select a menu or input of data. Also used to acknowledge fault signal and service
signal.
Used to move the cursor in a menu.
Used to scroll between the menus.
Used when LEDs "Alarms queued" are lit. Scroll through the queued alarm points or zone addresses.
See also 18.1.2. FIRE ALARM on page 38.
NOTE! To scroll/browse through the queued zones, use the soft key "Next zone" (23).
The function is shown in the display above the soft key. The function of a soft key may vary. If nothing
is shown above the key in the display, the key has no function for the moment.
Used to reset: Fire alarms, co-incidence alarms.
NOTE! Has to be pressed for > 0.5 sec.
Used to silence alarm devices / sounders. If "silence alarm devices" is activated, it is indicated by a
symbol in the display, see (35).
Used to silence the buzzer in the c.i.e. when it is sounding.
16