Introduction - Panasonic EBL512 G3 Operating Instructions Manual

1. INTRODUCTION

This document is an operation instruction for the EBL 512 G3 system for 5000S series, S/W version 3.0.x.
It is intended to be used by the end-user and the fire brigade personnel as well as service- and commissioning engineers.
This document should be read in conjunction with:
• EBL512 G3 Planning Instructions MEW02759
• Technical descriptions, for the control and indicating equipment and all other units
Normally, information found in one of the documents is not found in another document. The documents complement each other.
DRAWINGS / CONNECTION DIAGRAMS
Resulting from continual development and improvement, all dimensions quoted are approximate only and subject to change without
notice, as are other technical features and data.
More information on characteristics, mounting, connections and technical data for the control unit and all
other units, is found in each Technical description respectively.
NATIONAL REGULATIONS
When planning a fire alarm installation, the national regulations must be obeyed. Detector coverage area and positioning of detector
in the room / building are not described in this document.
EBL512 G3 is very flexible. Many functions / facilities are built-in the system, for example in the S/W and EBLWin. When download-
ing S/W and SSD, different settings, conventions, languages, and so on can be set to fulfil national regulations.
Since the EBL512 G3 control unit (c.i.e.) is produced for many countries the look, the texts, the functions and so on might vary.
Some functions are adapted to different countries regulations and are described separately in special country specific documents.
6