Upgrade Number Of Alarm Points; Control Units In A Network - Panasonic EBL512 G3 Operating Instructions Manual

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS

24. UPGRADE NUMBER OF ALARM POINTS

All EBL512 G3 settings are normally factory downloaded before delivery. It is however, on site possible to upgrade the maximum
number of alarm points (128 → 256 → 512).
Do not forget to add the new control unit in the network ring, see section 16.3.7 SYSTEM PROPERTIES,
PAGE 4 in Planning Instructions for this system.
If you wish to upgrade the number of alarm points, a PC and EBLWin are used. The PC must be connected to the USB connector in
the control unit and you must log on.
For more information, see Planning Instructions for this system.

24.1. CONTROL UNITS IN A NETWORK

All control units connected to a network are not required to have the same maximum number of alarm points set.
81