Table of Contents
Advertisement
Configure Intelligent Analysis
Parameter
OSD Enable
Counting Clear Interval
Area Type
Set Correction Value
Over People Number
Alarm
Alarm Threshold
Output Channel
Flashlight Alarm
Audible Alarm
Issue V1.0 (2023-02-10)
Description
Enable the OSD, the count data will show
on live video screen.
The camera will clear counting data at the
setting interval. 10 min /half- hour /1 hour
/2 hours /12 hours /1 day /custom time(hh :
mm)
Click the "Clear Counting", clearing the
data immediately.
Draw a line on live video screen.
The label of A and B indicate out and in.
Enable, set the count correction value, it
can be positive or negative. For example,
if there are 30 people enter the area before
counting, input 30 to correct. If 30 people
go out the area, input -30.
Enable, if the counting number is ovwe the
threshold, it will alarm.
The threshold of activating alarm.
If you check to set the Output Channel and
the device is connected to an external
alarm indicator, the alarm indicator signals
when an alarm is triggered. Only for Some
Models.
Enable to flashlight alarm when it triggers
the alarm, the flashlight will flash. Only
for Some Models.
Enable, when the alarm happens, it will be
play audio to alarm.
Choose the audible alarm file (set at the
"Configuration > Alarm > Audible
Alarm Output").
Only for some models.
Camera User Manual
Setting
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Choose from drop-down
list.
[Default value]
12 hours
[How to set]
Choose from drop-down
list.
[Default value]
Line
[How to set]
Enable /Input a value in
the area box.
[Default value]
0
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Enable /Input a value in
the area box.
[Default value]
1000
[How to set]
Click to select an ID.
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
94
Advertisement
Table of Contents
