Camera User Manual
Parameter
Black List
White List
Click
Click
Step 4 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
CGI Alarm Service Center
Description
Device will push the alarm message by CGI with Start URL and End URL, and send to data to CGI
Server by HTTP protocol. CGI alarm message is the head of User-Agent of HTTP. Use HTTP protocol
Issue V1.0 (2023-02-10)
Description
Specified network segment
should be banned.
Allow specified network
segment to access.
Add IP Filter page
to modify the parameters of setting black list or white.
to delete the setting black list or white.
Configure the Network Service
Setting
[Setting method]
6. Click
to enter the add
black/white list page, as shown in
Figure 13-8
7. Enter Begin IP Address.
8. Enter End IP Address.
9. Enter Descrtption.
10.Click OK, the black list added
successfully.
[Setting method]
1. Click
to enter the add
black/white list page, as shown in
Figure 13-8.
2. Enter Begin IP Address.
3. Enter End IP Address.
4. Enter Descrtption.
5. Click OK, add the white list
successfully.
139