Table of Contents
Advertisement
Configure the Device
Parameter
Video Refresh
Frequency
Step 2 Enter a channel name.
The channel name must be within the length of 0 to 32 bytes, it is combined with digital and character (except
for some special character, such as< > % & \",=+|).
Step 3 Click
.
The message "Apply success!" is displayed.
If the video system is modified, the message "The device will be restart, are you sure to modify?" is displayed,
and the system automatically saves the settings. The settings take effect after the device restarts.
----End
OSD
Description
The on-screen display (OSD) function allows you to display the device name, channel ID and name,
time, and other customized contents on videos. You can drag the OSD frames to anywhere you want to
put.
When the resolution is D1 and CIF, the OSD customized in web interface can show at most 22
words normally.
The OSD support simplified Chinese, English, digital and some special character only.
Procedure
Step 1 Choose Configuration > Device > OSD.
The OSD page is displayed, as shown in Figure 4-9.
Issue V1.0 (2023-02-10)
Description
The options are as follows:
50 Hz: corresponds to the PAL
system.
60 Hz: corresponds to NTSC
system.
Camera User Manual
Setting
[Setting method]
Follow the video standard.
56
Advertisement
Table of Contents
