Configure the Network Service
Procedure
Step 1 Choose Configuration > Network Service > DDNS.
The DDNS page is displayed, as shown in Figure 13-2.
Step 2 Click the button on to enable DDNS.
Step 3 Set the parameters according to Table 13-1.
Parameter
DDNS
Provider
Network Card
Name
130
DDNS page
DDNS parameters
Description
Indicates whether to enable the DDNS
service.
DDNS service provider. Currently, only
3322 and dyndns are supported.
Name of network card
Camera User Manual
Setting
[Setting method]
Click the button on to
enable DDNS.
[Default value]
OFF
[Setting method]
Select a value from the
drop-down list box.
[Default value]
3322
NOTE
Set this parameter based on
the site requirements.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Eth0
Issue V1.0 (2023-02-10)