Table of Contents
Advertisement
Configure Intelligent Analysis
Step 2 Set all parameters of Retrograde . Table 7-5 describes the specific parameters.
Parameter
Mode (only
for PTZ
camera)
Enable
Output
Channel
Issue V1.0 (2023-02-10)
Retrograde Setting Interface
Retrograde Parameter Description
Description
There are two modes can be chosen, normal mode
and preset point mode.
When you choose the preset point mode, please
choose one which is set in advanced.
Enable the button to enable the alarm.
If you check to set the Output Channel and the device
is connected to an external alarm indicator, the alarm
indicator signals when an alarm is triggered. Only for
Some Models.
Camera User Manual
Setting
[How to set]
Choose from the
drop-down list
[Default value]
Normal mode
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click to select an
ID.
86
Advertisement
Table of Contents
