Table of Contents
Advertisement
Configure the Alarm Function
When you select time by dragging the cursor, the cursor cannot be moved out of the time area.
Otherwise, no time can be selected.
.
Step 7 Select the Out Channel from the drop-down list box.
Step 8 Select the PTZ Type from the drop-down list box. The PTZ type includes preset, scan, track, tour.
Step 9 Select Value. The value is the ID of PTZ type.
Step 10 Click the button on to enable Alarm Record.
Step 11 Click the button on to enable SMTP.
Step 12 Click the button on to enable FTP Upload.
Step 13 Click the button on to enable IR Cut.
Step 14 Click Apply.
The message "Apply succeed!" is displayed, and the system saves the settings.
----End
Motion Alarm Linkage
Description
On the Motion Alarm page, you can perform the following operations:
Enable the motion detection function.
Set the motion detection alarming time.
Set the motion detection area.
Configure the motion alarm output channel.
When the alarm output function is enabled and the camera detects that an object moves into the
motion detection area within the schedule time, the camera generates an alarm and triggers
linkage alarm output.
Procedure
Step 1 Choose Configuration >Alarm > Motion Alarm.
The Motion Alarm page is displayed, as shown in Figure 9-7.
108
Schedule Setting Page
Camera User Manual
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
