Whitelight Alarm Output (Only For Some Models) - D-Link DCS-F Series User Manual

Configure the Alarm Function
Camera User Manual
Flashlight alarm interface
Set the alarm time and flicker interval.
Configure the schedule time setting.
Click "Apply" to save the settings.
----End

Whitelight Alarm Output (Only for Some Models)

The DayNight mode is chosen Night mode, and the light is IR LED or NONE, Which is the
Prerequisite, so that this linkage action is valid.
Enable to whitelight alarm when it triggers the alarm, the whitelight will be on.
At Configuration > Alarm > Whitelight Alarm Output interface, set the duration of alarm, as shown
in Figure 9-13.
Issue V1.0 (2023-02-10)
114