Table of Contents
Advertisement
Configure the Alarm Function
2. Press and hold the left mouse button, and drag in the video area to draw a detection area.
Click Clear to delete a detection area. Click the red block to disarm this area.
----End
Push Message
Description
The alarm notification will be pushed to the mobile app if the devices are managed by app.
Procedure
Step 1 Choose Configuration > Alarm > Push Message.
The Push Message page is displayed, as shown in Figure 9-9.
Step 2 Click Apply.
110
Motion Area Setting Page
Push Message Page
Camera User Manual
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
