Table of Contents
Advertisement
Configure External Devices
External PTZ Parameters (Only for Some Models)
Description
When the IP camera is connected to an external PTZ, you can set external PTZ parameters, such as PTZ
Protocol, PTZ Address, Baud Rate, and Data Bits.
This function is available only for a camera connected to an external PTZ. The PTZ address must be set
to the address of the external PTZ; otherwise, the external PTZ cannot be used.
Procedure
Step 1 Choose Configuration > External Device > PTZ.
The PTZ page is displayed, as shown in Figure 5-1.
Step 2 Set the parameters according to Table 5-1.
Issue V1.0 (2023-02-10)
5 Configure External Devices
PTZ Page
Camera User Manual
66
Advertisement
Table of Contents
