Table of Contents
Advertisement
Configure the Device
Parameter
Obtain IP address
automatically
DHCP IP
IP Address
Subnet Mask
Default Gateway
Preferred DNS
Server
Alternate DNS
Server
MTU
Step 3 Click Apply.
Issue V1.0 (2023-02-10)
Description
The device automatically obtains the IP
address from the DHCP server.
IP address that the DHCP server assigned to
the device.
Device IP address that can be set as
required.
Subnet mask of the network adapter.
This parameter must be set if the client
accesses the device through a gateway.
IP address of a DNS server.
IP address of a domain server.
If the preferred DNS server is faulty, the
device uses the alternate DNS server to
resolve domain names.
Set the maximum value of network
transmission data packets.
Camera User Manual
Setting
[Setting method]
Click the button on to
enable obtain IP
address automatically.
NOTE
To query the current IP
address of the device, you
must query it on the
platform based on the
device name.
N/A
[Setting method]
Enter a value manually.
[Default value]
192.168.0.120
[Setting method]
Enter a value manually.
[Default value]
255.255.255.0
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1
[Setting method]
Enter a value manually.
[Default value]
192.168.0.2
[Setting method]
Enter a value manually.
NOTE
The MTU value is range
from 1280 to 1500, the
default value is 1500,
Please do not change it
arbitrarily.
50
Advertisement
Table of Contents
