Table of Contents
Advertisement
Configure the Network Service
Step 2 Input the value range from 0 to 63( audio/video dscp, alarm dscp and command dscp).
Step 3 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
Platform Access
Description
If the device and platform system are not at the same local network, you can connect device and
platform system to the external server. You should build a server for platform in advance, platform's
remote IP/Port and IP camera are mapping port to external network.
Procedure
Step 1 Choose Configuration > Network Service > Platform Access.
The Platform Access page is displayed, as shown in Figure 13-12
Step 2 Input the parameters. The host name and port are same as the platform, as shown in figure. It is the
IP or domain of external network server. The user name and password are same as platform login.
146
QOS page
Platform Access page
Camera User Manual
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
