D-Link DCS-F Series User Manual page 95

Camera User Manual
Parameter
Audible
Alarm
Flashlight
Alarm
Alarm
Record
SMTP
FTP Upload
Whitelight
Alarm
Step 3 Set a deployment area
Move the cursor to the drawing interface and click to generate a point, move the cursor to draw a line,
and then click to generate another point. This is how a line is generated. In this way, continue to draw
lines to form any shape, and right-click to finish line drawing, move the arrow in the field can set the
direction of converse. as shown in Figure 7-11.
Issue V1.0 (2023-02-10)
Description
Enable, when the alarm happens, it will be play audio
to alarm.
Choose the audible alarm file (set at the
"Configuration > Alarm > Audible Alarm
Output").
Only for some models.
Enable to flashlight alarm when it triggers the alarm,
the flashlight will flash. Only for Some Models.
Enable the button to enable the alarm record.
Enable the button to enable SMTP sever. More
details, please refer to chapter 13.5
Enable the button to enable File Transfer Protocol.
For more details, please refer to chapter 13.6
When the DayNight mode is chosen Night mode,
and the light is IR LED or NONE, this linkage
action is valid.
Enable to whitelight alarm when it triggers the alarm,
the whitelight will be on. Only for Some Models.
Configure Intelligent Analysis
Setting
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
[How to set]
Click to enable
Alarm Record.
[Default value]
OFF
[How to set]
Click to enable
SMTP.
[Default value]
OFF
[How to set]
Click to enable FTP
Upload.
[Default value]
OFF
[How to set]
Click the button on.
[Default value]
OFF
87