Table of Contents
Advertisement
Camera User Manual
If the message "Apply success!" is displayed, and the system saves the settings. The message "Set
network parameter success, Please login system again" is displayed. Use the new IP address to login
to the web management system.
If the message "Invalid IP Address", "Invalid Subnet Mask", "Invalid default gateway", "Invalid
primary DNS", or "Invalid space DNS" is displayed, set the parameters correctly.
----End
Device Port
Description
You must configure the HTTP port, control port, Real Time Streaming Protocol (RTSP) port and SSL
Control port for device route mapping in a LAN.
Procedure
Step 1 Choose Configuration > Device > Device Port.
The Device Port page is displayed, as shown in Figure 4-6.
Step 2 Set the parameters according to Table 4-6.
Issue V1.0 (2023-02-10)
Device Port Page
Configure the Device
51
Advertisement
Table of Contents
