Camera User Manual
Parameter
Smart Encode
Step 3 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If the message "Apply failed!" is displayed, you must apply for the Parameter Configure
permission from an administrator. For details, see 14.1 Configure a User.
If a message indicating that the bit rate invalid is displayed, enter a new bit rate value.
----End
ROI Parameter
Procedure
Step 1 Click Configuration > Stream > ROI.
The ROI page is displayed, as shown in Figure 4-3.
Issue V1.0 (2023-02-10)
Description
Smart Encode.
Smart encode includes H.264 & H.265.
The storage space will be reduced fifty percent
when smart encode is enabled.
Only main stream supports smart encode.
Configure the Device
Setting
[Setting method]
Click the button
on to enable
Smart Encode.
45