Table of Contents
Advertisement
Camera User Manual
Parameter
FTP Path
Media Type
FTP over
SSL/TLS
(FTPS)
Step 4 Click Test FTP to verify the parameter, shows " Test succeed ", the parameters are right. If it
shows " Test failed", you need modify the information correctly.
Step 5 Click Apply.
If the message "Apply success!" is displayed, and the system saves the settings.
If other information is displayed, set the parameters correctly.
----End
IP Filter
Description
Set the IP address in specified network segment to allow access or prohibit access.
Procedure
Step 1 Choose Configuration > Network Service > IP Filter.
The IP Filter page is displayed, as shown in Figure 13-7.
Issue V1.0 (2023-02-10)
Description
FTP Path to save the JPG
image.
The media type of sending to
FTP, snapshot or video clip.
Encrypt the files by SSL/TLS
when they are be transferred.
Configure the Network Service
Setting
[Setting method]
Enter a value manually.
[Setting method]
Select a value from the drop-down list
box.
[Default value]
Snapshot
[Setting method]
Tick
137
Advertisement
Table of Contents
