D-Link DCS-F Series User Manual page 37

Camera User Manual
Table 3-5 describes DayNight Mode parameters.
Parameter Meaning
D/N Setting It can be set to Auto, Day, Night or Timing.
Mode
Auto mode
The image color and filter status are
automatically switched based on the ambient
brightness. The filter keeps infrared light from
reaching the sensor during the day; The filter
allows all light to reach the sensor at night.
Day mode
The image is colored, and the filter is in the day
state, preventing infrared light from entering the
sensor.
Night mode
The image is black and white, and the filter is in
the night state, allowing infrared light to enter
the sensor.
Timing
Switching between day mode and night mode
according to the set time.
Issue V1.0 (2023-02-10)
DayNight Mode Interface
Parameters of DNR
Image Settings
Configuration Method
[Setting method]
Select a value from the
drop-down list.
[Default value]
Auto
29