Retrograde - D-Link DCS-F Series User Manual

Camera User Manual
Move the cursor to the drawing interface and click to generate a point, move the cursor to draw a line,
and then click to generate another point. This is how a line is generated. In this way, continue to draw
lines to form any shape, and right-click to finish line drawing, as shown in Figure 7-9.
NOTE
A drawn line cannot cross another one, or the line drawing fails.
Any shape with 8 sides at most can be drawn .
The quantity of deployment areas is up to 8.
Step 4 Set deployment time
For more details please refer to 7.1 Step 4.
----End

Retrograde

Description
Retrograde allows setting the travel direction criteria for a target within an area on the video screen.
When a target of specified type (such as people or car) within this area moves in the set travel direction,
an alarm is generated.
Procedure
Step 1 Select Intelligent Analysis > Retrograde to access the Retrograde setting interface, as shown in
Figure 7-10.
Issue V1.0 (2023-02-10)
Deployment Area Setting Interface
Configure Intelligent Analysis
85