Table of Contents
Advertisement
Configure Protocol Parameters
Procedure
Step 1 Choose Configuration > Protocol > Security.
The Security page is displayed as shown in Figure 15-2. Table 15-2 describes the parameters on the
Security page.
Parameter
User
Verification
Step 2 Click Apply.
A dialog box is displayed, indicating the parameter configuration success. To make the configuration
take effect, click Confirm to restart the device.
----End
Onvif Configuration
Description
You can view the existing protocol name and version number of the current device on the
Configuration > Protocol > Onvif Configuration page, as shown in Figure 15-3. Table 15-3 describes
the protocol-related parameters.
152
Security Page
Parameter Description
Description
When you select the
User Verification
check box, the user
name and password
must be the same as
those for logging in to
the device web page.
NOTE
The default user name is
admin, and the default
password is admin.
Setting
[Setting method]
Click the button on to enable User
Verification.
Camera User Manual
Issue V 1.1(2023-02-10)
Advertisement
Table of Contents
