Table of Contents
Advertisement
Parameters of PTZ
Step 3 Set the Timer Mode. Timer mode includes Everyday and Once. You should set the time when once
mode is selected.
Step 4 Choose Once, click Time to choose day from the pop-up calendar.
Step 5 Set Timers.
Select the begin time, end time, PTZ type and name from the drop-down list box.
A maximum of eight timers can be configured.
Click Clear to delete the setting.
Step 6 Click
Configure Extension
You can set light On/Off, brush function and reboot action in extension page.
Click Extension, the Extension page is displayed as shown in Figure 2-8.
Light function
Click
to enable the light.
Light On/Off is used to control the infrared camera shields on and off.
Brush function
Click
to enable brush.
Brush is used to clean the lens.
Brush is available only to a camera with a brush or a camera shield.
Light On/Off is available only to specific camera shields.
Reboot Action
The camera will perform the selected PTZ type and name when the camera reboots and the reboot
action is enabling.
− Click the reboot action button to enable reboot action.
18
to finish the timer setting.
Extension
Camera User Manual
Issue V 1.1(2021-08-12)
Advertisement
Table of Contents
