Image Settings; Access The Image Settings Interface; Mode - D-Link DCS-F Series User Manual

Image Settings

3.1.1 Access the Image Settings Interface

Operation Procedure:
Step 1 On the web interface, enter Configuration > Image Settings interface.
Step 2 Choose Debug Mode on Mode item to set the parameters. You can set four schems.
----End

3.1.2 Mode

Operation procedure:
Step 1 Click Mode tag on image settings interface, the Mode page is displayed, as shown in Figure 3-2.
20
Image Settings Interface
Camera User Manual
3 Image Settings
Issue V 1.1(2021-08-12)