Table of Contents
Advertisement
Camera User Manual
Parameter
Alarm Type
Name
Type
URL Start
URL End
Proxy Setting
Address
Port
Platform User Name
Platform Password
Test the connection to
the specified HTTP
server
Step 4 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings. If the message is
"Parameter is invalid", you should check if the parameters are correct.
Issue V1.0 (2023-02-10)
Description
All alarm types can be chosen,
users can choose one to alarm,
or choose all.
Name of CGI Alarm.
Type of CGI Alarm.
Push the alarm message by
CGI with start URL
Push the alarm message by
CGI with end URL
Indicates whether to enable
the Proxy.
Forwarder server of CGI
alarm to forward the CGI
alarm.
IP address of Forwarder
server.
Port of Forwarder server.
User name of forwarder
server.
Password of forwarder server.
Test if the device connects to
the proxy successfully.
Configure the Network Service
Setting
[Setting method]
Select a value from the drop-down list box.
[Default value]
All
[Setting method]
Enter a value manually.
[Setting method]
Select a value from the drop-down list box.
[Default value]
HTTP
[Setting method]
Enter a value manually.
For example:
http://192.168.35.74:80/MajorAlarmType&
MinorAlarmType&SourceName&DeviceID
&DeviceIP&AlarmTime&Description
[Setting method]
Enter a value manually.
For example:
http://192.168.35.74:80/MajorAlarmType&
MinorAlarmType&SourceName&DeviceID
&DeviceIP&AlarmTime&Description
[Setting method]
Click the button on.
[Default value]
OFF
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Enter a value manually.
[Setting method]
Click Test, if the device connects to the
proxy successfully, the message "Test CGI
alarm success" is displayed.
141
Advertisement
Table of Contents
