Table of Contents
Advertisement
Configure the Network Service
If the message "Apply success!" is displayed, and the system saves the settings.
If other information is displayed, set the parameters correctly.
----End
SMTP
Description
If the Simple Mail Transfer Protocol (SMTP) function is enabled, the device automatically sends JPG
images and alarm information to specified email addresses when an alarm is generated.
Procedure
Step 1 Choose Configuration > Network Service > SMTP.
The SMTP page is displayed, as shown in Figure 13-5.
Step 2 Set the parameters according to Table 13-4.
Parameters marked with
Parameter
SMTP Server
Address
134
SMTP page
are mandatory.
SMTP parameters
Description
IP address of the SMTP
server.
Setting
[Setting method]
Enter a value manually.
Camera User Manual
Issue V1.0 (2023-02-10)
Advertisement
Table of Contents
