Table of Contents
Advertisement
Camera User Manual
Set all parameters for Intrusion. Table 6-1 describes the specific parameters.
Parameter
Mode (only for PTZ
camera)
Preset Point
Enable
Output Channel
Issue V1.0 (2023-02-10)
Smoke flame detection description
Description
There are two modes can be chosen,
normal mode and preset point mode.
When you choose the preset point
mode, please choose one which is set
in advanced.
At thermal channel, Enable the button
to enable the alarm.
If you check to set the Output
Channel and the device is connected
to an external alarm indicator, the
alarm indicator signals when an alarm
is triggered.
Advanced Intelligent Analysis
Setting
[How to set]
Choose from the drop-down list
[Default value]
Normal mode
---
[How to set]
Click Enable to enable.
[Default value]
OFF
[How to set]
Click to select an ID.
69
Advertisement
Table of Contents
