Table of Contents
Advertisement
Camera User Manual
12 Configure the Privacy Mask Function
Procedure
Step 1 Choose Configuration > Privacy Masking.
The Privacy Masking page is displayed, as shown in Figure 12-1.
Step 2 Click Draw to show the red frame, drag the four corners of rectangle to adjust the position.
Step 3 Click Clear to delete the chosen frame.
The maximum percentage of an image that can be masked depends on the device model. Read the tip displayed
on the page.
A maximum of four areas can be masked.
Tick the ID of mask area and click Delete to delete the masking.
Step 4 Set the parameters according to Table 12-1.
Issue V1.0 (2023-02-10)
Privacy Masking page
Configure the Privacy Mask Function
127
Advertisement
Table of Contents
