Initialization To Factory Shipment Setting - Panasonic GP-X Series User Manual

4.9 Initialization to Factory Shipment Setting

Factory shipment settings other than the calibration and sensor head re-
placement mode can be restored.
Reference
Setting example
<Setting 1 mode>
POINT
94
Ramco Innovations www.ramcoi.com
For the initial setting items, refer to section "2.4 List of Factory Shipment
Settings" on page 43.
Press
・Initialization takes about four seconds.
・Power must be turned off then on again with 1.06 or earlier software
versions.
・To initialize the calibration and sensor head replacement modes, restore
the default sensor head replacement mode.
For details, refer to section "5.4 Sensor Head Replacement Setting" on
page 108.
to select "InIt".
Press
detection state is indicated.
Phone 800-280-6933 nsales@ramcoi.com
to initialize, then the