Measurement Function; Holding Measurement Function - Panasonic GP-X Series User Manual

2.3 Measurement Function

2.3.1 Holding Measurement Function

The holding measurement function includes the following variations.
Display
Reference
Normal (no hold):
The measured value is always displayed with analog voltage output and
judgment output.
The displayed value, judgment output and analog voltage output are held
with the timing input.
Displayed value
Timing input
(External trigger)
32
Ramco Innovations www.ramcoi.com
Name
Normal
Peak hold
Bottom hold
Peak-to-peak hold
Sample hold
Average hold
For the setting procedure, refer to section "3.4.2 Manual Mode" on page 54.
0
ON
OFF
Description of action
The measurement result is displayed and
output.
The maximum value at the designated
interval is measured.
The minimum value at the designated
interval is measured.
The difference between the maximum and
minimum values at the designated interval
is measured.
The minimum value at the designated
interval is measured.
A simple mean of the measurement
interval is measured.
(nonE)
Phone 800-280-6933 nsales@ramcoi.com
Measured value
Measurement
Displayed value
Output value
Time