How To Enter A Value - Panasonic GP-X Series User Manual

2.2.2 How to Enter a Value

The value entry method for the upper limit is described as an example.
Change upper limit setting 2.0000mm to 4.5000mm.
1. In the detection state, press the
2. Press the
3. Press the
4. Using the
5. Press the
6. After changing, press the
7. Press the
*There is another method to replace the upper or lower limit setting with the current de-
tection distance.
negative conversion.
Ramco Innovations www.ramcoi.com
Setting Example
The MODE indicator (orange) next to the
key lights up to indicate the setting mode, and the
current memory number is displayed.
key.
" " (H-thr) is displayed.
This is the upper limit setting change menu.
key.
" " (2.0000) blinks.
or
number.
The number increases each time the
pressed.
The number decreases each time the
pressed.
key to move the blinking digit
and repeat step 4 to change the number.
value.
key.
The MODE indicator (orange) is not lit to indicate
that the controller has returned to the detection
mode.
key.
key, change the blinking
key is
key is
key to set the
Phone 800-280-6933 nsales@ramcoi.com
. All digits blink to indicate positive/
31