4.8 Memory Switching Method Setting
To switch the memory number for storage of settings described in sec-
tion "3.1 Memory Selection", there are two methods: panel key operation
method and external input method. Select the appropriate method otherwise
memory switching will not occur.
The factory shipment setting is panel key operation.
Setting example
To change panel key operation to external input
<Setting 1 mode>
Press
to select "mem-c".
Press
or
to select "Ext".
Set
For memory switching using external input, refer to section "1.5 I/O Circuit
Reference
Diagrams" on page 14.
93
Ramco Innovations www.ramcoi.com
Phone 800-280-6933 nsales@ramcoi.com