Limitations On The Setting Ranges For Upper And Lower Limit Values - Panasonic GP-X Series User Manual

3.2.4 Limitations on the Setting Ranges for Upper and
Lower Limit Values
The following limitations are applied to the upper and lower limit value set-
tings.
POINT
POINT
Displayed value
2.0
0
50
Ramco Innovations www.ramcoi.com
・
・Enter the values so that the following equation stands true: Upper limit
value (H-thr) - hysteresis width (o-hys) > Lower limit value (L-thr) + hyster-
displayed.
Press the key to remove the error indication. Enter the correct value.
・Using the display scaling function "SLOPE", "Two-point scaling", "INV",
or height detection mode "hIGht", reverse the span (inclination) of the dis-
played value. And, when using the zero setting function. set the lower limit
value (L-thr) as follows.
Reversing the span (inclination)
using the display scaling function
Displayed value
2.0
Detection
distance
0
2.0
–1.0
Offset value
–3.0
Zero setting at
1 mm position
Displayed value
Detection
distance
0
2.0
Phone 800-280-6933 nsales@ramcoi.com
Detection
distance
1.0 2.0
Lower limit
value (L-thr)
setting range