Panasonic GP-X Series User Manual page 136

Example 7: Perform zero setting for controller address 0.
Example 8: Load the analog voltage output scaling data from controller ad-
Reference
Example of creation of BCC
・Concerning BCC
Block check codes (BCC) are added to each command. Calculate
exclusive OR of ASCII characters from the start "%" to the end of the
command string and the result is added in two text characters. To
omit BCC calculation, specify "
130
Ramco Innovations www.ramcoi.com
After setting the full-scale distance in the detection range, send.
Transmission: %EE#WCG03
Response: %EE$WCG0
Transmission: %EE#WCG04
Response: %EE$WCG0
Transmission: %EE#WZS00
Response: %EE$WZS0
To cancel zero setting,
Transmission: %EE#WZS01
Response: %EE$WZS0
dress 0.
For details of analog voltage output scaling, refer to section "4.5 Analog
Voltage Output Scale" on page 81.
If "0.0000mm" is set at "0.0000V" and "2.0000mm" is set at
"5.0000V",
Data of second point
Response: %EE$RSV01
Two BCC characters
Last character
of text
CR
CR
CR
CR
CR
CR
CR
CR
Response: %EE$RSV00
+000.0000, +000.0000
Transmission: %EE#RSV01
+002.0000, +005.0000
Header
H25
H45
H45
H23
Calculate exclusive OR of
H52
the received message.
H4D
H44
In ASCII
H31
H30
H5C
" in place of BCC codes.
Phone 800-280-6933 nsales@ramcoi.com
CR
CR
CR
CR
BCC (H) H35
BCC (L) H43