Panasonic GP-X Series User Manual page 98

If sensor heads are mounted close together without using the interference
In the case of an opposing installation layout
In the case of a parallel installation layout
B
Communication error by the calculation between controllers in the in-
tererence prevention function ON state
1) If a calculation setting is used in the the intererence prevention function
ON state, the time to take for detecting signal transmission errors is lon-
ger according to the No. of the connected units. (For 8 units connected, it
takes approx. 2 min. max. ) Take care when an error occurs.
2) In case a calculation setting is used in the the intererence prevention
function ON state, if the averaging frequency exceeds 4,096 times, a com-
munication error occurs when the power is turned ON. In order to avoid
the communication error, set the averaging frequency as less than 4,096
times.
92
Ramco Innovations www.ramcoi.com
A
Model No.of
A (mm) B (mm)
sensor head
15
GP-X3S
30
GP-X5S
40
GP-X8S
40
GP-X10M
170
GP-X12ML
GP-X22KL 200
Phone 800-280-6933 nsales@ramcoi.com
9
11
15
15
50
200