Display Setting; Selection Of Data Displayed In Upper And Lower Lines - Panasonic GP-X Series User Manual

4.6 Display Setting

4.6.1 Selection of Data Displayed in Upper and Lower Lines

The items displayed on the panel in the detection state can be designated.
upper line (orange) and the "GO detected value" on the lower line (green).
Setting example
<Setting 1 mode>
<Lower line setting>
Note: With this function, calculation can be made
with the optional controller communication
unit.
If calculation is not made, a random value is
displayed.
If the default setting is selected on the upper line, the default setting is
Notice
restored for the lower line, too.
86
Ramco Innovations www.ramcoi.com
Upper line (Orange)
Lower line (Green)
Press to select "dISP".
<Upper line setting>
Default
Distance detection
Various hold values
Calculated value (Note)
Upper limit value
Lower limit value
Lower line display item
(name)
Default
Distance detection
Various hold values
Calculated value (Note)
Upper limit value
Lower limit value
Upper line display item
(name)
Phone 800-280-6933 nsales@ramcoi.com
In the case of voltage
output display: "voLt"
Press or to
select the item.
Press to set.
In the case of voltage
output display: "voLt"
Press or to
select the item.
Press to set.