Using The Actual Detection Value To Set (Teaching) - Panasonic GP-X Series User Manual

If the
value blinks.
Press the
does not change if the value is "0").

3.2.3 Using the Actual Detection Value to Set (Teaching)

Change the upper limit value from "1.5000" to "1.7000".
<Detected state>
Ramco Innovations www.ramcoi.com
key is pressed when the least significant digit blinks, the entire
or key in this state to change the sign of the value (the sign
Press to make the entire value blink.
Press
Setting example
Press
Upper limit value
setting mode
or to change the sign.
to select "H-thr".
Press and hold
seconds to teach.
Set
Phone 800-280-6933 nsales@ramcoi.com
for more than two
The blinking value indicates
that the distance between
the sensor head
detected object is "1.2350".
Change the
(blinking value) between
the sensor head and the
detected object to "1.7000"
then press the
set.
and
distance
key to
49