Display Refreshment Period Menu And Display Places Setting; Display Places Setting - Panasonic GP-X Series User Manual

4.6.4 Display Refreshment Period Menu and Display Places Setting

The display refreshment period and the number of displayed digits can be
changed.
1) Display refreshment period
2) Number of displayed digits
<Setting 1 mode>
Ramco Innovations www.ramcoi.com
The refreshment period of the displayed value can be changed.
Select the refreshment frequency per second.
Designate the position of the decimal point. Designate the position from
the right end with a number between "1" and "5".
The factory shipment setting is "5" for type with 5mm detection range or
"4" for type with 10mm detection range.
Setting method
Press to select "diSP".
<Display refreshment period>
<Number of displayed digits>
Phone 800-280-6933 nsales@ramcoi.com
or
Press
to select the item.
Press
20 cycles/sec.
to confirm.
10 cycles/sec.
5 cycles/sec.
2 cycles/sec.
1 cycle/sec.
or
Press
to select the item.
(Display example)
"1.2500"
Press
to confirm.
"1.250"
"1.25"
"1.2" (Last digit discarded)
89