<Detection state>
Ramco Innovations www.ramcoi.com
Press
<Option mode>
<Characteristics code entry mode>
Press
to select "chG".
is caused.
POINT
menu again.
to select "set.op".
Press
to select "head".
Phone 800-280-6933 nsales@ramcoi.com
"deflt" indicates the characteristics
code of a head adjusted in a set with
the controller. On this menu, press
the
key.
Enter the 10-digit number
hexadecimal consisting of numbers
"0" to "F".
Press
to move to another digit.
The highlight moves to the left end on the
the lower line after the right end on the
upper line.
Press
or
to change the number.
Press
to set.
The figure on the left shows a
setting example for "0102030202".
109